How to set up your device’s firmware for TTN network

The AlphaX devices come with the default configuration. If you would like to change the configuration according to the different network type, this guide will be helpful for you.

1. Find your device as a wifi network with the name “AlphaX-X1-xxxx” (where xxxx is the serial code of the device) on your system or smart device.
2. After successfully connecting the wifi; Open your browser, type “192.168.4.1” in the search bar and hit Enter.

1. This is the web interface to configure your device.

1. Select your network type from the dropdown list. TTN is the second option. Click Next.

1. Device MAC field is read-only and shows the MAC id of your device which can be used to register your device.
2. If you want to change Application EUI then enter the valid value of exact 16 characters. Click Next. (If Next or Previous button is disabled, make sure your current inputs are valid according to the green coloured guidelines for each field.)

1. If you want to change Application KEY then enter the valid value of exact 32 characters. Click Next. (If Next or Previous button is disabled, make sure your current inputs are valid according to the green coloured guidelines for each field.)

1. If you want to change Deepsleep timer for your device then enter it (in Minutes) within the range of 1 to 43200. 

1. Click the “Save and Reboot” button if you are satisfied with your changes or you can alter them by going back using the “Previous” button at any time. (If Save and Reboot or Previous button is disabled, make sure your current inputs are valid according to the green coloured guidelines for each field.)
2. After submitting the form, your device will get rebooted automatically, you can register your device in AlphaX using the link provided. (Note: Make sure, you have a valid internet connection to open the link.)