X1 PIR Counter is a wide beam passive infrared sensor which can be used to track people entering a designated area.
X1 Infrared People Counter
Description
The X1 Infrared People Counter Sensor is a high sensitivity infrared sensor that detects people and/or movement in the detection zone.
The device can be set to count the number of people it detects or trigger an event. It is particularly suited to counting people entering and exiting a fixed zone.
It can also detect the presence of other heat sources such as small animals or rodents when they enter the detection area.
It can sense motion detection with the speed as low as 1 m/s and has a detection range of up to 5m from the sensor
Additional information
| Weight | 1 kg |
|---|---|
| Dimensions | 10 × 10 cm |
| Colour | Black, White |
| Communication | Wifi, LoRaWan, Bluetooth, 4G LTE NB-IoT/Cat-M1 |
Specifications
Overview
- IP68 rated waterproof casing
- Aluminium and Polycarbonate construction
- Size: Cylindrical 40mm (D) x 109mm (H)
- RTC: Running at 32KHz
Sensor Range
- Detection Area A
- Horizontal: 122-degree
- Vertical: 35-degree
- Detection: Maximum 5m
- Detection Area B
- Horizontal: 150-degree
- Vertical: 20-degree
- Detection: Maximum 5m
CPU
- Xtensa® dual-core 32–bit LX6 microprocessor(s), up to 600 DMIPS
- Hardware floating-point acceleration
- Micro-Python Operating System
Memory
- RAM: 4MB
- External flash: 8MB
LoRa specification
- Semtech LoRa transceiver SX1276
- LoRaWAN stack
- Class A and C devices
- Node range: Up to 40km
LPWAN connectivity
- X-Mesh**
- LPWAN TTN**
- LTE Cat-M1*
* Service charges may be applicable.
** Requires gateway for connectivity
WiFI Connectivity
- MQTT Protocol Compliant
- 802.11 b/g/n/e/i
- 802.11 n (2.4 GHz), up to 150 Mbps
- 802.11 i security features: pre–authentication and TSN
- Wi–Fi Protected Access (WPA)/WPA2/WPA2– Enterprise/Wi–Fi Protected Setup (WPS)
Bluetooth Connectivity
- Compliant with Bluetooth v4.2 BR/EDR and BLE specification
- Class–1, class–2 and class–3 transmitter without external power amplifier
- Enhanced power control
- +12 dBm transmitting power
- Â Adaptive Frequency Hopping (AFH)
Power Options
- Rechargeable 18650 LiPo Battery 1
( 1 x 3400mAh batteries,3.7V operation)
1: Estimated 1-year battery life at hourly transmission intervals.
Mounting Kits
- Magnetic Mounting
- Stud Mounting
Security & Certification
- 256-bit SHA, MD5, DES, AES Encryption
- CE, FCC, IC and RCM certified
- FCC-ID: 2AJMTLOY4R
- CE 0700
Â
Documentation
X1-IBR-2v2 Infrared Beam People Counter Sensor Datasheet
X1-IBR-2v2 Infrared Beam People Counter Sensor Quickstart
Payload
The size of the Payload for this device is 12 bytes.
Please refer to this article to learn more about decoding a payload: Decoding a Payload
Sample Device Data:Â Â
Voltage:Â 4106 mV
Message Number: 1
RSSI -(dB): 1
ErrorCode:Â 0
Sample Sensor Data:Â Â
Count: 85
