Knowledge Base:Home»AlphaX Cloud, Triggers»How to Edit Watchdog

How to Edit Watchdog

Last Updated: August 13th, 2020
In this article

 Editing Watchdog 

1. After creating your watchdog, it will appear on the list of Logix watchdog. The user need to click on the edit button in front of the created watchdog to edit the watchdog. (also depicted in the picture below) 

2. After clicking on the edit button, next window will open which will have following options (as depicted in fig below): 

• Summary • Alert Settings • Notification settings • Locations.

2.1 Alert Settings

1. In alert settings, users can change the name of the watchdog, site, the upper limit, the lower limit and notes.

2. Then click on “Save” button.

2.2 Notification Settings  

1. In notification settings, the user can edit the person whom the user wants to be notified and also user can rewrite subject as per preferences and can edit the acknowledgement duration and extra information which can added to the email.

2. Then click on “Save” button.

2.3 Location

1. In this section, click on “Add Location to Monitor” button to assign sensor/s to watchdog or to remove sensor/s from watchdog.

2. A pop-up window will open in which the user can select sensor/s to assign to watchdog or to remove sensor/s from the watchdog.

3. After doing the changers click on “Save” button.

4. Then the user can see the current value of the sensor, status of the sensor and the last seen of the sensor.

2.4 Summary

1. In this section, the user can see the changed summary of the sensor/s in a graph.